Maintenance on StickVac Air & StickVac Air+

Questions :

1. The Stickvac motor works, but the gears don't, what does this mean?
→ It means that the circuit board needs to be replace : TDSTICKACONTB

2. The StickAir which stops after 4-5 minutes of use. It restarts immediately when you turn it back on → It is the thermocutter that acts because the motor overheats. So motor to be changed: TDSTICKAMOT1 or TDSTICKAMOT2

Replacement procedure for circuit board on StickVac Air & StickVac Air+

Steps : 

1. Remove plastic cover of the screw behind the handle and remove screw underneath and take off the bac of the handle.                                                                                           

2. Using a flat screwdriver push to upper part of the motor compartment to unclip and for it out.

 
3. Once top cover removed, you’ll have access to circuit board. 
 
4. Unplug the circuit board and replace with the new one. Follow the opposite instruction to reassemble.